About Arc Flash Calculator
Last updated: 2026-11-20
Who runs it
Arc Flash Calculator is operated by Paul, a sole proprietor trading as Arc Flash Calculator, as stated in the terms of service. It is a small independent product. The site does not name an engineering firm, a professional-engineer seal or a team behind it, because there is none to name.
Questions and corrections go to paul@arcflashcalculator.com. The contact page says what is useful to include.
What the tool is
A browser calculator for arc-flash incident energy and arc-flash boundary using the IEEE 1584-2018 method for 208 V to 15 kV equipment, with the NFPA 70E table method as a labelled fallback. It produces a watermarked label preview for free and a clean label, calculation record and energized-work permit as a paid step. The calculator page and the methodology page describe the method and its limits in detail.
What it is not
- It is not an engineered arc-flash study and carries no professional-engineer seal.
- It cannot check the available fault current or the clearing times you enter.
- It does not replace training, an equipment-condition assessment, or an energized-work decision by a qualified person.
- It does not model DC systems, single-phase systems, multiple sources or tie breakers.
Review status
Independent qualified review of the method, test anchors and document language: pending. This line reads the same setting that drives the status shown on the home page, so it cannot say more than is true. Until the review is marked complete, treat every result as calculation support to be checked by a qualified person.
Where the content comes from
The guides cite the standards by article or clause number and link to the publishers, OSHA and other public sources. NFPA 70E and IEEE 1584 are copyrighted and are described, not reproduced. Third-party claims, such as vendor features on the software comparison, are quoted from the vendor's own page with the date read. Errors are logged on the corrections page.