Skip to content

Field guide

Arc Flash Software Compared: Suites and Calculators

Reviewed November 20, 2026 Standards-linked editorial Review policy

"Arc flash software" covers three different jobs that are sold under one name: modelling a whole facility from a one-line diagram, computing one point in a simplified network, and producing a label from a handful of inputs. They cost different amounts, take different skills, and answer different questions. This page sorts the options by job and lets each vendor speak for itself. Every claim about another vendor below is taken from that vendor's own page, linked next to the claim, and was read on 20 November 2026. Vendors change their pages and prices without notice, so check the link before you rely on anything. We have not installed or tested any of these products, and we make no claim about how well they work. Logos are deliberately not used.

This site sells a browser calculator, so we are a party to the comparison. Read the last section before you read anything into the order.

Three jobs, not one

  1. Facility modelling. Build the single-line diagram, run short-circuit and protective-device coordination studies, and compute incident energy at every bus. This is what an engineering firm does for a plant-wide study.
  2. Single-point calculation. Take one fault location and a few inputs, apply the IEEE 1584-2018 model, and get incident energy and boundary for that point.
  3. Label and document output. Turn the results into a label, a permit and a record.

Most products do the third job as a by-product of the first or second. Nobody should buy a facility-modelling suite to label six panels, and nobody should use a single-point tool to certify a plant with multiple sources and tie breakers.

What each vendor says on its own page

SKM ArcCalc

Source: skm.com/arccalc.html, read 20 November 2026.

  • The page lists "$995 for ArcCalc" and, for comparison, "$4495 for smallest PTW combination with Arc Flash".
  • ArcCalc evaluates "a single fault location in a simplified network". The standalone version is activated with a key "with 3 buses and 8 components".
  • It is part of the Power*Tools for Windows suite.
  • The page describes calculating incident energy and arc flash boundary, selecting PPE, setting arcing-fault tolerances, and automatically determining trip times from protective-device settings. It lists a library of "thousands of validated protective device trip characteristics".
  • Labels are described as meeting NEC 110.16 requirements, printable in any size, with custom logos, text and local-language support. It also lists energized work permits and English or Metric reporting.
  • It refers to "the new IEEE 1584 2018 standard" and to NFPA 70E, without naming an NFPA edition.

ETAP arc flash software

Source: etap.com/product/arc-flash-software, read 20 November 2026.

  • The page names IEEE 1584-2018 and NFPA 70E 2027, along with DGUV-I 203-077, ENA NENS 09-2014 and CSA Z462 2024.
  • It lists 1-phase, 3-phase and UPS arc flash calculations, for enclosed and open-air equipment.
  • Labels are described for incoming main circuit-breaker cubicles, load terminals, motors and capacitor banks, along with electrical work permits and data sheets.
  • It is described as integrated with ETAP Star coordination software, a protective-device library and ETAP short-circuit analysis.
  • DC arc flash and ArcFault are "offered as a separate modules" per the page, so they are not part of this product.
  • No price is stated. The page offers "Get Pricing" and "Request Demo" links only.

EasyPower

Sources: easypower.com/products/features/arcflash and easypower.com/pricing-and-demo, read 20 November 2026.

  • The features page claims "Full IEEE-1584 and NFPA 70E compliance" and says results can be calculated "up to 800kV, at no additional cost".
  • It lists three-phase and single-phase analysis and says DC analysis is "included at no additional cost".
  • It says users can "Print arc flash labels with a single mouse click" and that "NFPA 70E work permits" are created from built-in templates.
  • It describes an integrated one-line diagram used for short-circuit and protective-device calculations, and offers a free demo copy.
  • The pricing page says "we do not publish a price list online". It says price depends mainly on features and bus count, with tiers at 50, 100, 300, 1000, 5000 and Unlimited buses, and offers a 30-day unconditional guarantee. No dollar figure is stated.

ArcAd (ARCAD Inc.)

Source: arcadvisor.com, read 20 November 2026.

  • It describes a "Universal IEEE 1584-2018 based arc flash hazard analysis web application".
  • The store section of the page lists "$290.00" for "Arc Flash Software". The page does not say what licence term or version that price covers, so confirm before buying.
  • The company profile says users can determine incident energy, arc-flash boundary and PPE level, and perform fault current calculations.
  • It says the software can create customised arc flash warning labels "meeting OSHA, NFPA 70E, CSA Z462 regulations", and the site also lists label printing services.
  • The page describes "online and PC based software" and mobile apps.

How the options line up

Network or fault-current modelling One-line diagram Protective-device library or coordination Labels Price on the vendor's own page
SKM ArcCalc Simplified single point (3 buses, 8 components in the standalone key) Not described as a full diagram Device library, automatic trip times Yes $995; PTW with Arc Flash from $4495
ETAP Integrated with short-circuit analysis and Star coordination (per page) Not described on this page Protective-device library and Star coordination Yes Not stated
EasyPower Short-circuit and protective-device calculations on one diagram (per page) Yes, integrated one-line Protective-device settings described Yes Not stated
ArcAd Fault current calculations (per page) Not described Not described Yes $290 store listing
This site No, one point No No, you supply clearing times Yes See pricing

Blank or "not described" means the pages we read do not say, not that the feature is absent.

Questions that decide it

  • How many points do you need, and how connected are they? A plant with several sources and tie breakers needs a modelling tool or an engineering firm. Six independent panels do not.
  • Who reads the time-current curves? Suites that carry a device library read them for you. A browser calculator asks you to supply the clearing time from the device, and the form makes you confirm the source.
  • Which edition of the standard does the tool implement? IEEE 1584-2018 replaced the 2002 edition with a different model. A tool that still uses the 2002 method gives different numbers. Ask the vendor which edition and which NFPA 70E table edition it uses.
  • What does the price cover? Two of the four pages state no price, and the ArcAd page does not say what licence term its listing covers. Ask for the full cost, including renewals, in writing.
  • Do you need DC or single-phase? ETAP says DC is a separate module. EasyPower says it is included. This site does neither.

This site, plainly

This calculator is a browser tool for the IEEE 1584-2018 method, the NFPA 70E table method as a fallback, and labels. It covers 208 V to 15 kV, rejects clearing times above 2,000 ms, models one source feeding one piece of equipment, and has no one-line diagram, coordination plots, device library, DC or single-phase model. It is calculation support for a qualified person, not an engineered arc-flash study, and the output does not replace one. The preview is free and the clean PDF is paid; prices are on the pricing page. The methodology page states exactly what the engine does and does not cover.

If your job is a plant-wide study, the honest answer is an engineering firm or a modelling suite, and the study companies and study cost pages are the better start. If your job is labels for a few simple panels, the arc flash calculator and label maker are built for that. Whichever you pick, the software does not make the inputs right: available fault current and clearing time still have to come from the utility and the protective device, and a qualified person has to review the result.

Direct answers

Frequently asked questions

Which arc flash software is best?

That depends on the job. Facility-wide studies with several sources need a modelling suite or an engineering firm. A few simple panels can be handled by a single-point calculator. This page quotes each vendor's own claims so you can match them to the job.

How much does arc flash software cost?

Only some vendors publish a price. On their own pages read 20 November 2026, SKM lists $995 for ArcCalc, ArcAd's store lists $290, and ETAP and EasyPower state no price. Check each link for current figures.

Do these tools replace an arc flash study?

Software computes results from inputs you supply. A study also includes field data collection, short-circuit and coordination analysis and professional review. This site's calculator does not replace an engineered study.

Does this site's calculator support DC or single-phase systems?

No. It covers three-phase systems from 208 V to 15 kV and models one source feeding one piece of equipment.

Source trail

Sources

Standards references identify the applicable document or section where possible. Standards text may require licensed access. Report a factual issue through the process on our corrections page.