Skip to content

Field guide

NFPA 70E Training Requirements: Who, What, How Often

Reviewed November 20, 2026 Standards-linked editorial Review policy

NFPA 70E, the Standard for Electrical Safety in the Workplace, puts the training duty on the employer. It does not issue a card, and it does not say a workshop is enough. This page lays out what the training requirements ask for, in the order a safety manager meets them: who has to be trained, what the training has to cover, how often it repeats, and what has to be on file. It is written against the 2024 edition of NFPA 70E and against OSHA's electrical rules in 29 CFR 1910.332 and 1910.399. NFPA has a later edition in its revision cycle, and anything changed there is not reflected here. The standard is copyrighted, so the requirements below are paraphrased. Read the clause text in your edition, and treat the article numbers as pointers to it.

Last reviewed: November 20, 2026.

Two sources, two jobs

OSHA and NFPA 70E overlap but do different work.

  • OSHA 1910.332 is law for general industry. It requires training for employees who face a risk of electric shock that the installation design does not reduce to a safe level, scoped to the risk, in the classroom, on the job, or both. It sets a minimum skill list for qualified persons and says nothing about certificates.
  • NFPA 70E is a consensus standard. It is not law by itself, but OSHA treats consensus standards as evidence of what a recognised hazard control looks like, and employers, insurers and courts use it that way. Its Article 110 is the home of the electrical safety program and its training provisions.

Outside the United States the picture changes. Canada uses CSA Z462 for the same purpose, and other countries have their own rules. Nothing on this page applies there without checking local law.

Who has to be trained

The standard sorts people by what they are exposed to, not by job title.

Qualified persons are those permitted to work within the boundaries around exposed energized parts. OSHA 1910.399 defines a qualified person as someone who has received training in, and has demonstrated skills and knowledge of, the construction and operation of the equipment and the hazards involved. Qualification is specific to equipment and task: the same worker can be qualified on one lineup and unqualified on another, and the employer makes the designation after seeing the skills demonstrated. A course completion does not make anyone qualified on its own.

Unqualified persons still need training. It is shorter and different: recognising the hazards of electricity and the boundaries, and staying outside them. A building maintenance worker who resets a breaker, a janitor who works in an electrical room, and a supervisor who walks the floor all belong here.

Contractors and host employers share duties. The employer who brings a contractor onto site and the contractor each have to tell the other about hazards and controls. The contractor's workers must be trained and qualified as above. A host cannot hand over a switchroom and consider its own training duty met for its own staff.

What the training has to cover

OSHA's floor for qualified persons is concrete. It requires the skills and techniques to distinguish exposed live parts from other parts of electric equipment, to determine the nominal voltage of exposed live parts, and to know the clearance distances that go with those voltages. NFPA 70E builds a working curriculum on that floor. A defensible qualified-person programme covers:

  • Recognising shock and arc-flash hazards, and the separate boundaries that manage each. The shock boundaries and the arc-flash boundary are different lines with different rules.
  • Doing the risk assessment: identifying the hazard, estimating likelihood and severity, and choosing controls in the standard's order, with elimination first and PPE last. The arc-flash part of that assessment is the work the calculator supports.
  • Choosing PPE by one of two methods, incident-energy analysis or the PPE category tables, and never mixing the two on one piece of equipment. See the PPE category method.
  • Establishing an electrically safe work condition: lockout, tagout and the verification test that proves the equipment is de-energised. Using the test instrument is itself energized work.
  • Reading an arc flash label and acting on it. The label is where a risk assessment meets the person at the panel; how to read an arc flash label walks through each field.
  • Emergency response for people exposed to shock hazards: releasing a victim, first aid, CPR and use of an AED. The standard sets a cadence for this that is shorter than the three-year training cycle. Confirm the exact wording in your edition.

How often training repeats

The backstop is a three-year cycle for qualified-person retraining. The standard also pulls retraining earlier when something changes. The triggers, paraphrased:

Trigger What it means
Three years since the last retraining The outer limit, not the schedule
Supervision or an inspection finds work practices not being followed Retrain before the affected work continues
New technology, new equipment, or changed procedures Retrain before working under the change
Job duties change Retrain before the new duties start
A task is done less often than once a year Retrain before doing it
A task needs safety-related practices outside the worker's regular duties Retrain before the task

Do not confuse this with the equipment cycle. Training clocks run on people. The arc-flash risk assessment behind the labels runs on equipment, with a review interval of no more than five years and sooner after system changes. They reset independently. See how often an arc flash study is required.

What to keep on file

The standard requires the employer to document that the required training took place. Audit practice around that requirement is consistent about what a useful record shows:

  • The employee's name and the date of each training session.
  • The content covered: a topic list, not just a course title.
  • How skills were demonstrated and on which equipment.
  • The qualification designation: which tasks, which equipment classes, and who made the decision.
  • The date retraining is next due, and the trigger that reset it last time.

A vendor certificate covers the first two. The last three are the employer's own work, and they are what an investigator asks for first after an incident. The NFPA 70E certification page explains why no certificate stands in for them and what the NFPA credential called CESCP is and is not.

Choosing a course

There is no single required curriculum or provider. Ask any provider for the syllabus and check it against the list above, check that the course is written for the edition your programme follows, and ask what the skills-demonstration step looks like. Online delivery can cover the knowledge half. A browser cannot watch a worker verify absence of voltage on your switchgear, so the demonstration stays with you. Courses sold as covering "everything" in a few hours should be read with that gap in mind.

Where the calculator fits, and where it stops

This site is a calculation tool, not a training provider. It does not train anyone, it does not qualify anyone, and nothing it produces substitutes for the employer's training file or for an engineered study. What it does is give a trained person a reviewable incident-energy and boundary result, a label preview, and the record behind both. Its method has limits: it covers 208 V to 15 kV, models one source feeding one piece of equipment, and refuses clearing times above 2,000 ms. The result is calculation support for a qualified person, and the person has to verify the inputs against the real equipment before relying on it.

Direct answers

Frequently asked questions

Who must be trained under NFPA 70E?

Employees exposed to electrical hazards. Qualified persons need training and demonstrated skills on the specific equipment and tasks, with the employer making the designation. Unqualified persons need training to recognise hazards and stay outside the boundaries.

How often is NFPA 70E training required?

Qualified-person retraining is required at intervals not exceeding three years, and earlier when supervision finds noncompliance, equipment or procedures change, job duties change, or a task is performed less than once a year.

Is there an NFPA 70E certification card?

No. Course providers issue certificates of completion and NFPA runs the CESCP professional credential, but the compliance record is the employer's own qualification determination and training file.

What records should the employer keep?

Names and dates, the content covered, how skills were demonstrated and on which equipment, the qualification designation, and the date retraining is next due.

Which edition does this page follow?

The 2024 edition of NFPA 70E and OSHA 29 CFR 1910.332 and 1910.399. NFPA has a later edition in its revision cycle that this page does not reflect. The text is paraphrased because the standard is copyrighted.

Source trail

Sources

Standards references identify the applicable document or section where possible. Standards text may require licensed access. Report a factual issue through the process on our corrections page.